dmesg - Intel Core i7-10700 - ASUS Intel UHD 630 CML GT2 2GB
Linux version 5.10.0-1038.40-hardened (builder@build) (gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, GNU ld (GNU Binutils for AstraLinuxCE) 2.28) #astra3 SMP Wed Aug 25 11:21:55 UTC 2021 (Astra 5.10.0-1038.40.astra3-hardened 5.10.46)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: xstate_offset[9]: 960, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
BIOS-e820: [mem 0x0000000040400000-0x0000000085b96fff] usable
BIOS-e820: [mem 0x0000000085b97000-0x0000000085b97fff] ACPI NVS
BIOS-e820: [mem 0x0000000085b98000-0x0000000085bbdfff] usable
BIOS-e820: [mem 0x0000000085bbe000-0x0000000085bbefff] reserved
BIOS-e820: [mem 0x0000000085bbf000-0x00000000947f9fff] usable
BIOS-e820: [mem 0x00000000947fa000-0x0000000096a4bfff] reserved
BIOS-e820: [mem 0x0000000096a4c000-0x0000000096cdbfff] ACPI data
BIOS-e820: [mem 0x0000000096cdc000-0x0000000096ddffff] ACPI NVS
BIOS-e820: [mem 0x0000000096de0000-0x0000000097d44fff] reserved
BIOS-e820: [mem 0x0000000097d45000-0x0000000097ffefff] type 20
BIOS-e820: [mem 0x0000000097fff000-0x0000000097ffffff] usable
BIOS-e820: [mem 0x0000000098000000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000085f7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x96cdb000 ACPI 2.0=0x96cdb014 SMBIOS=0x97bb8000 SMBIOS 3.0=0x97bb7000 MEMATTR=0x91182018 ESRT=0x92e73218
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 3.2.0 present.
DMI: ASUS System Product Name/PRIME H410M-D, BIOS 0601 04/03/2020
tsc: Detected 2900.000 MHz processor
tsc: Detected 2899.886 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x85f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009C000000 mask 7FFC000000 uncachable
3 base 009A000000 mask 7FFE000000 uncachable
4 base 0099000000 mask 7FFF000000 uncachable
5 base 2000000000 mask 6000000000 uncachable
6 base 1000000000 mask 7000000000 uncachable
7 base 4000000000 mask 4000000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x98000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000092e73218 to 0x0000000092e73250.
e820: update [mem 0x92e73000-0x92e73fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Kernel/User page tables isolation: force enabled on command line.
Using GB pages for direct mapping
secureboot: Secure boot could not be determined (mode 0)
RAMDISK: [mem 0x30e2d000-0x3470dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000096CDB014 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000096CDA728 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x0000000096CD4000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000096C9A000 0398D8 (v02 ALASKA A M I 01072009 INTL 20160527)
ACPI: FACS 0x0000000096DDF000 000040
ACPI: MCFG 0x0000000096CD9000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000096CD6000 0020AD (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x0000000096CD5000 000A52 (v02 PmRef ItbmSci 00003000 INTL 20160527)
ACPI: FIDT 0x0000000096C99000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000096BA4000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000096C94000 0030AD (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x0000000096C91000 002703 (v02 Intel PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x0000000096C90000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000096C8E000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x0000000096C8A000 003736 (v02 INTEL xh_cmvd4 00000000 INTL 20160527)
ACPI: NHLT 0x0000000096C89000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x0000000096C87000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: WSMT 0x0000000096C86000 000028 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000096C83000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527)
ACPI: DBGP 0x0000000096C82000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x0000000096C81000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: BGRT 0x0000000096C7F000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WPBT 0x0000000096BA6000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: DMAR 0x0000000096C80000 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: APIC 0x0000000096BA5000 00012C (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0x96cd4000-0x96cd4113]
ACPI: Reserving DSDT table memory at [mem 0x96c9a000-0x96cd38d7]
ACPI: Reserving FACS table memory at [mem 0x96ddf000-0x96ddf03f]
ACPI: Reserving MCFG table memory at [mem 0x96cd9000-0x96cd903b]
ACPI: Reserving SSDT table memory at [mem 0x96cd6000-0x96cd80ac]
ACPI: Reserving SSDT table memory at [mem 0x96cd5000-0x96cd5a51]
ACPI: Reserving FIDT table memory at [mem 0x96c99000-0x96c9909b]
ACPI: Reserving FPDT table memory at [mem 0x96ba4000-0x96ba4043]
ACPI: Reserving SSDT table memory at [mem 0x96c94000-0x96c970ac]
ACPI: Reserving SSDT table memory at [mem 0x96c91000-0x96c93702]
ACPI: Reserving HPET table memory at [mem 0x96c90000-0x96c90037]
ACPI: Reserving SSDT table memory at [mem 0x96c8e000-0x96c8f47a]
ACPI: Reserving SSDT table memory at [mem 0x96c8a000-0x96c8d735]
ACPI: Reserving NHLT table memory at [mem 0x96c89000-0x96c8902c]
ACPI: Reserving LPIT table memory at [mem 0x96c87000-0x96c87093]
ACPI: Reserving WSMT table memory at [mem 0x96c86000-0x96c86027]
ACPI: Reserving SSDT table memory at [mem 0x96c83000-0x96c8571f]
ACPI: Reserving DBGP table memory at [mem 0x96c82000-0x96c82033]
ACPI: Reserving DBG2 table memory at [mem 0x96c81000-0x96c81053]
ACPI: Reserving BGRT table memory at [mem 0x96c7f000-0x96c7f037]
ACPI: Reserving WPBT table memory at [mem 0x96ba6000-0x96ba603b]
ACPI: Reserving DMAR table memory at [mem 0x96c80000-0x96c800a7]
ACPI: Reserving APIC table memory at [mem 0x96ba5000-0x96ba512b]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000085f7fffff]
NODE_DATA(0) allocated [mem 0x85f7d6000-0x85f7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000085f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003fffffff]
node 0: [mem 0x0000000040400000-0x0000000085b96fff]
node 0: [mem 0x0000000085b98000-0x0000000085bbdfff]
node 0: [mem 0x0000000085bbf000-0x00000000947f9fff]
node 0: [mem 0x0000000097fff000-0x0000000097ffffff]
node 0: [mem 0x0000000100000000-0x000000085f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000085f7fffff]
On node 0 totalpages: 8338327
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA zone: 28770 pages in unavailable ranges
DMA32 zone: 9424 pages used for memmap
DMA32 zone: 603129 pages, LIFO batch:63
DMA32 zone: 15367 pages in unavailable ranges
Normal zone: 120800 pages used for memmap
Normal zone: 7731200 pages, LIFO batch:63
Normal zone: 2048 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x99800000-0x9f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x907b8000-0x90968fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
PM: hibernation: Registered nosave memory: [mem 0x85b97000-0x85b97fff]
PM: hibernation: Registered nosave memory: [mem 0x85bbe000-0x85bbefff]
PM: hibernation: Registered nosave memory: [mem 0x907b8000-0x90968fff]
PM: hibernation: Registered nosave memory: [mem 0x92e73000-0x92e73fff]
PM: hibernation: Registered nosave memory: [mem 0x947fa000-0x96a4bfff]
PM: hibernation: Registered nosave memory: [mem 0x96a4c000-0x96cdbfff]
PM: hibernation: Registered nosave memory: [mem 0x96cdc000-0x96ddffff]
PM: hibernation: Registered nosave memory: [mem 0x96de0000-0x97d44fff]
PM: hibernation: Registered nosave memory: [mem 0x97d45000-0x97ffefff]
PM: hibernation: Registered nosave memory: [mem 0x98000000-0x9f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u262144
pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 8208015
Policy zone: Normal
mem auto-init: SLAB_POISON will take precedence over init_on_alloc/init_on_free
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 32536520K/33353308K available (12290K kernel code, 2467K rwdata, 4080K rodata, 2128K init, 5512K bss, 816528K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x29/0x460 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000097945000 end: 0x00000097b8efff
DMAR: RMRR base: 0x00000099000000 end: 0x0000009f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
Parsec helper LSM: Initializing.
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x5)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (92796.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x85b97000-0x85b97fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x96cdc000-0x96ddffff] (1064960 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 04:41:09, date: 2022-08-08
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1659933669.060:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Added _OSI(Linux-Dell-USB4-Wakeup)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000004) is beyond end of object (length 0x4) (20200925/exoparg2-396)
fbcon: Taking over console
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000004) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000006) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000006) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000007) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000007) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000009) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000009) is beyond end of object (length 0x4) (20200925/exoparg2-396)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI Error: Result stack is empty! State=00000000755a17c6 (20200925/dswstate-65)
ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20200925/dsutils-610)
ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20200925/dsutils-725)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC1296E00 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC11D1000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC1365000 0005E4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC135EC00 00016C (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC0EC8000 000BEA (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC1364000 000778 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC0049800 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC0ECE000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EADC1254000 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
pci 0000:00:00.0: [8086:9b43] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:9bc5] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x600a000000-0x600affffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:a3af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x600b010000-0x600b01ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a3ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x600b025000-0x600b025fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a382] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1204000-0xa1205fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa1207000-0xa12070ff]
pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa1206000-0xa12067ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a394] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a397] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a39a] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a3da] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a3a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xa1200000-0xa1203fff]
pci 0000:00:1f.3: [8086:a3f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x600b020000-0x600b023fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x600b000000-0x600b00ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a3a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x600b024000-0x600b0240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:1184] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xa0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x6007ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x6008000000-0x6009ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xa1000000-0xa107ffff pref]
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xa1080000-0xa1083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa10fffff]
pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6009ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xa1100000-0xa11fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1d.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x85b97000-0x87ffffff]
e820: reserve RAM buffer [mem 0x85bbe000-0x87ffffff]
e820: reserve RAM buffer [mem 0x907b8000-0x93ffffff]
e820: reserve RAM buffer [mem 0x92e73000-0x93ffffff]
e820: reserve RAM buffer [mem 0x947fa000-0x97ffffff]
e820: reserve RAM buffer [mem 0x85f800000-0x85fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x9f800000-0x9f9fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x4010000000-0x40101fffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x9fa00000-0x9fbfffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x4010200000-0x40103fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa10fffff]
pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6009ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0x9f800000-0x9f9fffff]
pci 0000:00:1c.0: bridge window [mem 0x4010000000-0x40101fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1d.0: bridge window [mem 0x9fa00000-0x9fbfffff]
pci 0000:00:1d.0: bridge window [mem 0x4010200000-0x40103fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
pci_bus 0000:00: resource 8 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: resource 10 [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa10fffff]
pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6009ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0x9f800000-0x9f9fffff]
pci_bus 0000:02: resource 2 [mem 0x4010000000-0x40101fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0x9fa00000-0x9fbfffff]
pci_bus 0000:04: resource 2 [mem 0x4010200000-0x40103fffff 64bit pref]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 58244K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000008c0ca000-0x00000000900ca000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.32)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:1c.7: AER: enabled with IRQ 124
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: Ignoring BGRT: unexpected or invalid BMP data
efifb: framebuffer at 0x4000000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
intel_idle: v0.5.1 model 0xA5
intel_idle: Local APIC timer is reliable in all C-states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1206000 port 0xa1206100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xa1206000 port 0xa1206180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xa1206000 port 0xa1206200 irq 126
ata4: SATA max UDMA/133 abar m2048@0xa1206000 port 0xa1206280 irq 126
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2022-08-08T04:41:10 UTC (1659933670)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x7a/0x210 mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0xa0655, pf=0x2, revision=0xc8
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (3528880587, 671144)->(3561121324, -31569593)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 944c629c61f856cbdfbe703673d23b83403d6d9f'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
PM: Magic number: 2:168:666
nochmodx: loading out-of-tree module taints kernel.
nochmodx: module verification failed: signature and/or required key missing - tainting kernel
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: KINGSTON SKC600512G, S4200102, max UDMA/133
ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: ATA-8: TOSHIBA HDWD110, MS2OA8R0, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC6005 0102 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8R0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2128K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 16K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.10.0-1038.40-hardened
pti=on
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.0-1038.40-hardened xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.0-1038.40-hardened xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i2c i2c-0: 2/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8168h/8111h, 24:4b:fe:79:56:d1, XID 541, IRQ 128
r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
checking generic (4000000000 300000) vs hw (600a000000 1000000)
checking generic (4000000000 300000) vs hw (4000000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 215x45
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usb 1-3: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2903.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc050a48e, max_idle_ns: 440795325698 ns
clocksource: Switched to clocksource tsc
usb 1-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=25.20
usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3: Product: CSR8510 A10
process '/bin/fstype' started with executable stack
PM: Image not found (code -22)
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=8564, idProduct=7000, bcdDevice=80.00
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: StoreJet Transcend
usb 2-2: Manufacturer: StoreJet Transcend
usb 2-2: SerialNumber: WKPHSJEV
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-4: new full-speed USB device number 3 using xhci_hcd
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
usb 1-4: New USB device found, idVendor=1395, idProduct=0025, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Sennheiser USB headset
usb 1-4: Manufacturer: Sennheiser Communications
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /lib/systemd/system/assistant.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: apache2.service: Cannot add dependency job, ignoring: Unit apache2.service is masked.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
ppdev: user-space parallel port driver
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
systemd-journald[407]: Received request to flush runtime journal from PID 1
usb 2-1: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SanDisk 3.2Gen1
usb 2-1: Manufacturer: USB
usb 2-1: SerialNumber: 03035814102720235239
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
asus_wmi: ASUS WMI generic driver loaded
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lp0: using parport0 (interrupt-driven).
usb 1-6: new low-speed USB device number 4 using xhci_hcd
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
Adding 33352700k swap on /dev/sda3. Priority:-2 extents:1 across:33352700k SSFS
nvidia-nvlink: Nvlink Core is being initialized, major device number 235
usb 1-6: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: USB Keyboard
usb 1-6: Manufacturer: Logitech
snd_hda_intel 0000:00:1f.3: enabling device (0400 -> 0402)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
usb 1-7: new full-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
scsi 4:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-8: new low-speed USB device number 6 using xhci_hcd
usb 1-8: New USB device found, idVendor=18f8, idProduct=0f99, bcdDevice= 1.00
usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-8: Product: USB OPTICAL MOUSE
usb 1-7.1: new full-speed USB device number 7 using xhci_hcd
scsi 5:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
usb 1-7.1: New USB device found, idVendor=0557, idProduct=2213, bcdDevice= 1.00
usb 1-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.1: Product: HDMI KVM V1.2.116
usb 1-7.1: Manufacturer: ATEN Advance Tech Inc.
usb 1-9: new high-speed USB device number 8 using xhci_hcd
usb 1-9: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: Mass Storage Device
usb 1-9: Manufacturer: JetFlash
usb 1-9: SerialNumber: 03YJA4BG34LOJNHQ
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-9:1.0
usbcore: registered new device driver usbip-host
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.57.02 Tue Jul 13 16:14:05 UTC 2021
sd 5:0:0:0: [sdd] Attached SCSI removable disk
hid: raw HID events driver (C) Jiri Kosina
mc: Linux media interface: v0.10
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.57.02 Tue Jul 13 16:06:24 UTC 2021
vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3
vhci_hcd: created sysfs vhci_hcd.0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: USB/IP Virtual Host Controller
usb usb3: Manufacturer: Linux 5.10.0-1038.40-hardened vhci_hcd
usb usb3: SerialNumber: vhci_hcd.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: USB/IP Virtual Host Controller
usb usb4: Manufacturer: Linux 5.10.0-1038.40-hardened vhci_hcd
usb usb4: SerialNumber: vhci_hcd.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
nvidia-uvm: Loaded the UVM driver, major device number 509.
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
usbcore: registered new interface driver btusb
Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds...
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
input: Sennheiser Communications Sennheiser USB headset as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.3/0003:1395:0025.0001/input/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
hid-generic 0003:1395:0025.0001: input,hidraw0: USB HID v1.00 Device [Sennheiser Communications Sennheiser USB headset] on usb-0000:00:14.0-4/input3
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C31C.0002/input/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-6/input0
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0003/input/input24
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0003/input/input25
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-6/input1
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:18F8:0F99.0004/input/input26
hid-generic 0003:18F8:0F99.0004: input,hidraw3: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-8/input0
input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:18F8:0F99.0005/input/input27
input: USB OPTICAL MOUSE Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:18F8:0F99.0005/input/input28
hid-generic 0003:18F8:0F99.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:14.0-8/input1
input: ATEN Advance Tech Inc. HDMI KVM V1.2.116 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:0557:2213.0006/input/input30
vboxdrv: Found 16 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2903980886 Hz
vboxdrv: Successfully loaded version 6.1.34 r150636 (interface 0x00320000)
hid-generic 0003:0557:2213.0006: input,hidraw5: USB HID v1.00 Keyboard [ATEN Advance Tech Inc. HDMI KVM V1.2.116] on usb-0000:00:14.0-7.1/input0
input: ATEN Advance Tech Inc. HDMI KVM V1.2.116 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:0557:2213.0007/input/input31
hid-generic 0003:0557:2213.0007: input,hidraw6: USB HID v1.00 Mouse [ATEN Advance Tech Inc. HDMI KVM V1.2.116] on usb-0000:00:14.0-7.1/input1
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=MAC)
scsi 6:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] 59725824 512-byte logical blocks: (30.6 GB/28.5 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
r8169 0000:03:00.0 eth0: Link is Down
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: hci0: command 0x0c52 tx timeout
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
usb 2-1: USB disconnect, device number 3
usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
usb 2-1: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SanDisk 3.2Gen1
usb 2-1: Manufacturer: USB
usb 2-1: SerialNumber: 03035814102720235239
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 5:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
virbr0: port 3(vnet1) entered learning state
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
virbr0: port 3(vnet1) entered disabled state
usb 2-1: USB disconnect, device number 4
usb 2-1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
usb 2-1: New USB device found, idVendor=0951, idProduct=172c, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: DataTraveler 80
usb 2-1: Manufacturer: Kingston
usb 2-1: SerialNumber: E03F4914167FE47069FE00C4
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 5:0:0:0: Direct-Access Kingston DataTraveler 80 PMAP PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 60551808 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 2b 00 00 08
sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdd: sdd1 sdd2
sd 5:0:0:0: [sdd] Attached SCSI removable disk
usb 2-2: USB disconnect, device number 2
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 1-9: USB disconnect, device number 8
sd 6:0:0:0: [sde] Synchronizing SCSI cache
sd 6:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-2: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
usb 2-2: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: SanDisk 3.2Gen1
usb 2-2: Manufacturer: USB
usb 2-2: SerialNumber: 03035814102720235239
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
scsi 4:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-2: USB disconnect, device number 6
usb 2-2: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
usb 2-2: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: SanDisk 3.2Gen1
usb 2-2: Manufacturer: USB
usb 2-2: SerialNumber: 03035814102720235239
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
scsi 4:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdd: sdd1 sdd2
usb 2-1: USB disconnect, device number 5
usb 2-1: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: JetFlash
usb 2-1: SerialNumber: 03YJA4BG34LOJNHQ
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 5:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 59725824 512-byte logical blocks: (30.6 GB/28.5 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 8
usb 2-1: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: JetFlash
usb 2-1: SerialNumber: 03YJA4BG34LOJNHQ
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 5:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 59725824 512-byte logical blocks: (30.6 GB/28.5 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI removable disk
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
usb 1-9: new high-speed USB device number 9 using xhci_hcd
usb 1-9: New USB device found, idVendor=0951, idProduct=172c, bcdDevice= 1.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: DataTraveler 80
usb 1-9: Manufacturer: Kingston
usb 1-9: SerialNumber: E03F4914167FE47069FE00C4
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-9:1.0
scsi 6:0:0:0: Direct-Access Kingston DataTraveler 80 PMAP PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] 60551808 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 2b 00 00 08
sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sde: sde1 sde2
sd 6:0:0:0: [sde] Attached SCSI removable disk
usb 2-2: USB disconnect, device number 7
usb 2-1: Disable of device-initiated U1 failed.
usb 2-1: Disable of device-initiated U2 failed.
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb 2-1: USB disconnect, device number 9
sd 5:0:0:0: [sdd] Synchronizing SCSI cache
sd 5:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sde: sde1 sde2
usb 1-9: USB disconnect, device number 9
usb 2-1: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd
usb 2-1: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SanDisk 3.2Gen1
usb 2-1: Manufacturer: USB
usb 2-1: SerialNumber: 03035814102720235239
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1:1.0
scsi 4:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-9: new high-speed USB device number 10 using xhci_hcd
usb 1-9: New USB device found, idVendor=8644, idProduct=800b, bcdDevice= 1.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: USB Flash Disk
usb 1-9: Manufacturer: General
usb 1-9: SerialNumber: 1354000000007D59
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-9:1.0
scsi 5:0:0:0: Direct-Access General USB Flash Disk 1.0 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 15656960 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdd] No Caching mode page found
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 5:0:0:0: [sdd] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
usb 1-9: USB disconnect, device number 10
usb 2-2: new SuperSpeed Gen 1 USB device number 11 using xhci_hcd
usb 2-2: New USB device found, idVendor=8564, idProduct=7000, bcdDevice=80.00
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: StoreJet Transcend
usb 2-2: Manufacturer: StoreJet Transcend
usb 2-2: SerialNumber: WKPHSJEV
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-2:1.0
scsi 5:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
usb 2-2: USB disconnect, device number 11
sd 5:0:0:0: [sdd] Synchronizing SCSI cache
sd 5:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-2: new SuperSpeed Gen 1 USB device number 12 using xhci_hcd
usb 2-2: New USB device found, idVendor=0951, idProduct=172c, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DataTraveler 80
usb 2-2: Manufacturer: Kingston
usb 2-2: SerialNumber: D850E64A7EBAE47069730113
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-2:1.0
usb 2-1: USB disconnect, device number 10
scsi 5:0:0:0: Direct-Access Kingston DataTraveler 80 PMAP PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 60551808 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 2b 00 00 08
sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 5:0:0:0: [sdc] Attached SCSI removable disk
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdc: sdc1 sdc2
usb 2-2: USB disconnect, device number 12
usb 2-2: new SuperSpeed Gen 1 USB device number 13 using xhci_hcd
usb 2-2: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: SanDisk 3.2Gen1
usb 2-2: Manufacturer: USB
usb 2-2: SerialNumber: 03035814102720235239
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
usb 2-1: new SuperSpeed Gen 1 USB device number 14 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=7000, bcdDevice=80.00
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: StoreJet Transcend
usb 2-1: Manufacturer: StoreJet Transcend
usb 2-1: SerialNumber: WKPHSJEV
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 4:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
scsi 5:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-2: USB disconnect, device number 13
usb 2-1: USB disconnect, device number 14
sd 5:0:0:0: [sdd] Synchronizing SCSI cache
sd 5:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 1-1: new high-speed USB device number 11 using xhci_hcd
usb 1-1: New USB device found, idVendor=0951, idProduct=172c, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: DataTraveler 80
usb 1-1: Manufacturer: Kingston
usb 1-1: SerialNumber: D850E64A7EBAE4706973008A
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1:1.0
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 80 PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 60551808 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 2b 00 00 08
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI removable disk
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdc: sdc1 sdc2
usb 1-1: USB disconnect, device number 11
usb 2-1: new SuperSpeed Gen 1 USB device number 15 using xhci_hcd
usb 2-1: New USB device found, idVendor=0951, idProduct=172c, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: DataTraveler 80
usb 2-1: Manufacturer: Kingston
usb 2-1: SerialNumber: E03F4914167FE47069FE00C4
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1:1.0
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 80 PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 60551808 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 2b 00 00 08
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI removable disk
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 60551807
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 60551807
GPT: Use GNU Parted to correct GPT errors.
sdc: sdc1 sdc2
usb 2-1: USB disconnect, device number 15
perf: interrupt took too long (3413 > 3142), lowering kernel.perf_event_max_sample_rate to 58500
usb 2-2: new SuperSpeed Gen 1 USB device number 16 using xhci_hcd
usb 2-2: New USB device found, idVendor=8564, idProduct=7000, bcdDevice=80.00
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: StoreJet Transcend
usb 2-2: Manufacturer: StoreJet Transcend
usb 2-2: SerialNumber: WKPHSJEV
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-2:1.0
scsi 4:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 2-1: new SuperSpeed Gen 1 USB device number 17 using xhci_hcd
usb 2-1: New USB device found, idVendor=0781, idProduct=5597, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SanDisk 3.2Gen1
usb 2-1: Manufacturer: USB
usb 2-1: SerialNumber: 03035814102720235239
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1:1.0
scsi 5:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 121896960 512-byte logical blocks: (62.4 GB/58.1 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1: USB disconnect, device number 17
blk_update_request: I/O error, dev sdd, sector 65 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sdd1, logical block 1, lost async page write
blk_update_request: I/O error, dev sdd, sector 7246752 op 0x1:(WRITE) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sdd1, logical block 7246688, lost async page write
Buffer I/O error on dev sdd1, logical block 7246689, lost async page write
blk_update_request: I/O error, dev sdd, sector 7258688 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sdd1, logical block 7258624, lost async page write
usb 2-1: new SuperSpeed Gen 1 USB device number 18 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: JetFlash
usb 2-1: SerialNumber: 03YJA4BG34LOJNHQ
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1:1.0
scsi 6:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sde] 59725824 512-byte logical blocks: (30.6 GB/28.5 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sdd1): Directory bread(block 7258624) failed
FAT-fs (sdd1): Directory bread(block 7258625) failed
FAT-fs (sdd1): Directory bread(block 7258626) failed
FAT-fs (sdd1): Directory bread(block 7258627) failed
FAT-fs (sdd1): Directory bread(block 7258628) failed
FAT-fs (sdd1): Directory bread(block 7258629) failed
FAT-fs (sdd1): Directory bread(block 7258630) failed
FAT-fs (sdd1): Directory bread(block 7258631) failed
FAT-fs (sdd1): Directory bread(block 7258632) failed
FAT-fs (sdd1): Directory bread(block 7258633) failed
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
virbr0: port 3(vnet1) entered learning state
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
virbr0: port 3(vnet1) entered disabled state
usb 1-3: USB disconnect, device number 2